May 19, 2021 - One of the difficult things I've had to learn as a perpetual novice lobster boat operator is that diesel engines need to get run hahhd at least once a day. "It's the worst thing for 'em, idling around all day hauling traps," Art Stanley told me, "those engines need to work."
My instinct is to baby every machine- to go easy around every corner and over every bump, start and stop gradually - be gentle.
This I learned from Malcolm. Before leaving for college, I only ever had one job, starting in 3rd grade or so. I started by following Lucille around taking care of shrubs and 'helping' with yard work, lamenting my fate when weeding on a wet mosquito-filled morning, but also marveling at my $.25/hr salary when I got it. I graduated to mowing lawns, and then headed for the big time with Malcolm and the haying crew, where I stayed until leaving home at 18, learning about the coefficient of friction, weight in motion and to operate and respect heavy machinery with big metal teeth.
Back to Malcolm. One year he purchased an F-150, for, I believe, $100.00, and got many seasons out of it on the farm. He could drive a vehicle slower than anyone else I've known. I believe I could count each RPM, especially on those rare occasions when 2nd or even 3rd gear was called for. Perhaps the velocity dilation actually changed time in that truck, which could possibly explain the longevity of what was already a fully depreciated piece of equipment. It probably also helped that the 1970s F-150 was made of actual metal.
What I took from these lessons was to try and feel the moving parts and joints, listen to the mechanical conversation from the vehicle, and go easy on 'er. You'll get a little more from things that way even if the world passes you by.
As much as I respect Art's advice, Mal's is hardwired. Which brings us to Black Beauty.
Megan bought a 1996 Mazda B4000 pickup truck for $800.00 in the Spring of 2014. Already fully depreciated itself before journeying to Matinicus, BB has trucked every single trap from my yard to the Steamboat Wharf and back for 7 seasons, going into #8. Well, almost every trap. At the end of last season, while trucking gear back from the wharf, a pronounced smell of burning rubber and overheating temp gauge put a premature end to Black Beauty's season.
I ordered a serpentine belt from NAPA last week. Somewhat amazingly, there is a decal beneath the hood showing which pulleys the belt goes over and under and, more importantly, how to relieve enough tension to slip the belt onto the last one. There's also a fan to be navigated which makes for some Escher-esque spatial visualization in getting it threaded into position. Then the easy part is finished.
The hard part is never having heard of a 'breaking bar.' I tried for a good long while to use my 3/8" socket handle to torque out the tension. Then I went and got a metal tube from the barn, thinking I could slide that over the socket handle for some extra yoink. Then I went and got a hacksaw so the tube would fit under the hood. Not happening this day.
Bart stopped in the next morning, and since his idea of winter relaxation is to tear down a '92 Volvo and rebuild it from scratch way prettier than brand new, I figured he might have some ideas. 'There's a hammer here. That can't be good. First, get rid of the hammer.'
'ok.'
Bart's insight involved us applying a lot of upper body strength to push down on the tensioner and the belt at the same time. 20 minutes or so of stubborn diligence, but again, no.
The decal was trying to tell us something. It showed pulling up on the other side of the tensioner as the path to success, rather than pushing down on this side. The problem though, was that with the fan and its plastic hood getting in the way, there was no chance of getting the bulky tube and wrench combo into position.
Clayton stopped in and mentioned a 'breaking bar.' Now I'd learnt something. I can see why it's good for breaking stuck bolts, knuckles and for tantrums. This ingeniously simple implement is just a long, extra heavy, but relatively thin and stripped down version of a socket handle.
A few seconds of fiddling into place, one good yoink and on goes the belt through a combination of leverage and pulling in the right direction.
Air in the tires, gasoline in the tank, a charged battery and she's off.
